Ramps
for stages.

Standard GUIL decks.
Access adapted to your setup.

Compare RMP kits

GUIL modular deck ramp with entry plate and landing

2RMP entry kits

80–120 cmstandard stage height*

PTA5-Rangle-adjustable legs

* For RMP-01 and RMP-03. Other heights by project. Decks are selected separately.

Two kits.
Different entry plates.

Both entry plates are one metre wide. RMP-03 has a longer entry surface for people with reduced mobility.

GUIL RMP-01, entry plate and modular ramp outdoors

RMP-01 · example setup

Entry kit

RMP-01

A ribbed aluminium plate for the transition from the floor to the first ramp deck.

1 × 0,4 mentry plate width × length

Entry plate weight: 6.5 kg
Complete kit weight: 13 kg

GUIL RMP-03, 1 × 1 m entry plate detail beside a deck

RMP-03 · entry detail

Entry kit with longer plate

RMP-03

A longer aluminium entry plate for a gentler transition between floor and ramp.

1 × 1 mentry plate width × length

Entry plate weight: 13.5 kg
Complete kit weight: 20 kg

In both kits

Entry plate.
And matching connections.

2 × TMU-02Deck leg connectors
2 fixed legsFor the first ramp deck
2 articulated telescopic legsFor the deck beside the stage

The kit is not a complete ramp. Decks, additional supports and edge protection are specified for the layout.

Decks form the system's foundation

A straight route.
Or a change of direction.

A straight route or a layout that changes direction. Length, landings and edge protection depend on the space and intended use.

Straight route

From the entry plate
to the stage.

Standard decks connect to form a continuous surface. Each support height is adjusted to its position on the ramp.

Original GUIL photograph of a setup

Prepare the layout details

RMP kits use standard decks

TM300 TM440 TM440XL

PTA5-R angle-adjustable leg

A joint for the angle.
A telescope for the height.

The articulated mount adjusts to the deck angle, while the telescopic section sets the support height. The aluminium leg profile measures 50 × 50 mm.

Explore stage legs

GUIL PTA5-R, original view of the articulated mount and deck connection — PTA5-R · articulated mount detail

50 × 50 mmOuter aluminium profile

Dual securing systemHandle and M10 screw with nut

Rubber footNon-slip floor support

Before choosing.
Measure the space.

To recommend a ramp, we need the stage height, available length and intended use of the access route.

Stage height

Measure from the floor to the top deck surface.

Space for the ramp

Record the available length, width and areas for changes of direction.

Purpose and ground conditions

Specify whether the ramp is for people or equipment, where it will be used and on what surface.

For access by people with reduced mobility, we check slope, width, landings and edge protection. Choosing a kit alone does not establish the suitability of the complete ramp.

Request a ramp proposal

Stage configurator

Build your stage

Choose decks, dimensions and working height.
Request a separate layout proposal for an access ramp.

Layout, height
and equipment list

The configurator connects the module layout with the equipment required. Review your setup before sending an enquiry.

Open the configurator

The configurator plans the stage setup. Ramp geometry and its equipment list are defined separately for the project.

Page of 28

GUIL · catalogue

Stages
and accessories

Decks, legs, stairs, rails, ramps and transport equipment. Models and specifications in one place.

Scope: 28 pages
Format: A4 · PDF
Edition: Croatian

We will email you a download link after your request.

Ramps
for stages.