TÜV certificate
Every truss element certified to EN 17115, with tables of permissible loads for each span.
01
The structure the whole show hangs on.
Truss systems, roof structures and rigging equipment with TÜV certificates — from a goalpost for a city stage to a complete roof system.
Truss types
Eight versions in silver and black finish
Tubes 50 × 2 mm and diagonals 20 × 2 mm, aluminium EN AW-6082 / 6080 T6, TÜV certified and made in Europe. Pins, safety clips and couplers are supplied with every section, and all versions are available in silver and black finishes.
01
Straight sections
A square profile in lengths of 0.5, 1, 1.5, 2 and 3 metres — the basic building block of every structure.
02
90° corners
A two-way 90° corner with a 0.5 m arm on each side — the basis of goalposts and frames.
03
T and multi-way corners
Three-way, four-way and T corners, 0.5 m arm — the structure branches in several directions from one point.
04
Circular segments
A full circle is assembled from arc segments — the diameter and number of pieces are chosen to suit the space and load capacity.
05
Base plates
A base plate with male couplers transfers the load to the floor and stabilises the tower.
06
Connecting hardware
Conical couplers, pins and safety clips are supplied with every section — assembly is fast and tool-free.
07
Arc segments
Arcs of various angles and lengths join into gentle curves and circles of different diameters.
08
Moving head stands
A truss stand with a base plate carries a moving head above the stage even without a roof system.
Silver finishBlack finish
Chain hoists
Raise tonnes of equipment safely
Electric chain hoists raise truss, sound and LED screens — from 250 kg to two tonnes per motor. The dual-brake version (D8+) allows lifting and holding loads above an audience, while control units for four or eight motors synchronise a whole roof system. For smaller loads and rigging prep, there’s a manual version.
250 kg – 2 t per motorD8+ dual brake4- and 8-channel unitsManual version
Iz ponude
TQN truss — square
Universal 29 cm square truss for goalposts, rigs and décor.
Lengths 0.5–4 m · EN 17115
TQN400XL truss — reinforced
A reinforced 400 × 400 mm square truss — for large spans, heavy roof systems and ground-support structures.
400 × 400 mm · reinforced version
Roof structure
A free-standing roof system with a canopy — for stages from 6×4 to 12×10 m.
Wind zone per calculation
Goalpost structure
A goalpost for a banner or lighting across a road or event entrance.
Span up to 10 m
Electric rigging motor
A chain motor for raising rigs — with a control unit.
Up to 500 kg · D8+
Connections and rigging equipment
Conical connectors, shackles, slings and safety cables — all certified.
Compatible with TQN/TTR
Connections and safety
Clamps, hooks and safety cables
Every fixture, speaker and motor is held by one or more clamps — and a safety cable that catches it if a connection fails. Aluminium and steel versions, theatre hooks, articulated adapters and safety cables for every tube diameter.
Aluminium and steelTubes Ø 48–51 mmSafety cablesFor tents and canopies
Aluminium clamps and accessories
Rigging fixtures, speakers and equipment to a truss tube — the most common connection on stage.
Steel hooks
For higher loads and rigid connections where aluminium is no longer enough.
Theatre hooks
For fixtures on theatre bars, bridges and galleries.
Tent clamps
Connect the structure to tent and canopy tubes without drilling.
Articulated adapters
Space saver — join two tubes at any angle.
Safety cables
Secondary safety for every suspended element — not an option, but a rule.
Telescopic mounts
Drop the fixture exactly where you need it
A telescopic aluminium T-tube drops the fixture below the truss line and locks at the required length. The clamp at the top grips the truss, the lower one holds the fixture or camera — angle and height are adjusted without dismantling the structure.
AluminiumTelescopicClamp at both endsFixtures and cameras
Safety
Safety is documented
Every structure we deliver comes with the paperwork inspectors ask for — a certificate, structural calculation and proof of crew competence.
02
Structural calculation
For roof systems and goalposts we supply a calculation for your dimensions and wind zone.
03
Crew training
The first assembly with our supervisor — your staff receive proof of competence.
Konfigurator konstrukcija · 3D alat
Truss portali, krovovi i štandovi — složi ih u 3D-u
Gradi rešetkaste konstrukcije izravno u prostoru — stupovi, grede, krovni i kružni truss. Konfigurator odmah ispiše popis elemenata i procjenu za upit.
Otvori konfiguratorNext step
Need truss or a structure?
Send the stage dimensions and location — we'll come back with a structure proposal and a structural calculation.
🇪🇸 GUIL — over 40 years of innovation in professional stage equipment
GUIL is one of Europe's leading manufacturers of professional equipment for the events industry, the audiovisual sector and industrial load handling. A family company founded in 1983 in Valencia, it specialises in lifting towers, mobile lifters, stages, aluminium truss structures, safety barriers and AV stands. Today GUIL products are used in more than 90 countries on every continent.
All products are developed and manufactured in the company's own facilities in Spain, under strict quality control. GUIL is known for robust construction, simple handling and long-term reliability — the first choice of rental companies, theatres, cultural institutions and television broadcasters around the world.
Since 1983Valencia, Spain90+ countriesIn-house manufacturing
🇭🇷 Authorised distributor for Croatia
LumiLas d.o.o. is the official distributor of GUIL products for the Republic of Croatia — with full sales and technical support, advice on equipment selection and reliable after-sales support.
Distributed by